Home Blog Page 5

Subrogation Definition


What is subrogation?

Subrogation is a term describing a right held by most insurance companies to legally sue a third party who has caused loss of insurance to the insured. This is done in order to recover the amount of the claim paid by the insurance company to the insured for the loss.

Key points to remember

  • Subrogation is a term describing a legal right held by most insurance companies to legally sue a third party who has caused loss of insurance to the insured.
  • Typically, in most cases of subrogation, an individual’s insurance company pays their client’s claim for losses directly and then requests reimbursement from the other party’s insurance company.
  • Subrogation is most common in an auto insurance policy, but also occurs in general and health insurance claims.

Understanding subrogation

Subrogation literally refers to the act of one person or party standing in the place of another person or party. It effectively defines the rights of the insurance company before and after it has paid claims made against a policy. In addition, it makes it easier to get a settlement under an insurance policy.

When a Assurance If the company sues a third party for damages, it is said that it “puts itself in the place of the policyholder” and will therefore have the same rights and the same legal status as the policyholder when will seek compensation for the losses. If the insured does not have the legal capacity to sue the third party, the insurer will also be unable to take legal action accordingly.

In most cases, an individual’s insurance company pays their client’s claim for losses directly and then requests reimbursement from the other party or their insurance company. The insured customer receives payment as soon as possible, then the insurance company can subrogate the party at fault for the loss.

Insurance policies may contain terms that allow an insurer, after losses have been paid on claims, to seek recovery of funds from an insurer. third party whether that third party caused the loss. The insured is not entitled both to file a claim with the insurer to receive the coverage provided for in the insurance policy and to seek damages from the third party who caused the losses.

Subrogation in the insurance sector, especially among car insurance policies, occurs when the insurance company assumes the financial burden of the insured as a result of payment for injury or accident and requests reimbursement from the responsible party.

An example of subrogation is when an insured driver’s car is totaled through the fault of another driver. The insurance company reimburses the covered driver under the terms of the policy and then pursues legal action against the offending driver. If the carrier is successful, it must apportion the recovered after-cost amount on a pro rata basis with the insured to reimburse any deductible paid by the insured.

Subrogation is not just relegated to auto insurers and auto policyholders. Another possibility of subrogation exists in the health care sector. If, for example, a health insurance the policyholder is injured in an accident and the insurer pays $ 20,000 to cover the medical bills, this same health insurance company is authorized to collect $ 20,000 from the party at fault to reconcile the payment.

Subrogation procedure for the insured

Fortunately for policyholders, the subrogation process is very passive for the victim of an accident at the fault of a third party. The subrogation process aims to protect policyholders; the insurance companies of both parties involved work in mediation and legally reach a conclusion on the payment. Policyholders are simply covered by their insurance company and can act accordingly. It benefits the insured to the extent that the party at fault has to make a payment upon subrogation to the insurer, which helps to keep the policyholder’s insurance rates low.

In the event of an accident, it is always important to stay in touch with the insurance company. Make sure all accidents are reported to the insurer in a timely manner and notify the insurer if there is a need for a settlement or legal action. If a settlement occurs outside of the normal subrogation process between the two parties in court, it is often legally impossible for the insurer to pursue subrogation against the offending party. This is because most regulations include a waiver of subrogation.

Waivers of subrogation

A waiver of subrogation is a contractual provision by which an insured waives the right of his insurer to seek redress or compensation for losses suffered by a negligent third party. Typically, insurers charge additional fees for this special rider. Many construction contracts and leases include a waiver of subrogation clause.

Such provisions prevent the insurance company of one party from bringing an action against the other contracting party in order to recover the sums paid by the insurance company to the insured or to a third party to settle a claim. covered. In other words, if the subrogation is waived, the insurance company cannot “put itself in the customer’s shoes” once the claim is settled and sue the other party to recover its losses. Thus, if the subrogation is waived, the insurer is exposed to a greater risk.

Frequently Asked Questions

Does the subrogation affect the insured victim?

The subrogation process, which aims to protect the insured, is very passive for the insured victim of an accident at the fault of another insured. The insurance companies of both parties involved work on mediation and legally come to a conclusion on the payment. Policyholders are simply covered by their insurance company and can act accordingly. It benefits the insured to the extent that the party at fault has to make a payment upon subrogation to the insurer, which helps to keep the policyholder’s insurance rates low.

What is an example of subrogation?

An example of subrogation is when an insured driver’s car is totaled through the fault of another driver. The insurance company reimburses the covered driver under the terms of the policy and then pursues legal action against the offending driver. If the carrier is successful, it must apportion the recovered after-cost amount on a pro rata basis with the insured to reimburse any deductible paid by the insured.

What is a waiver of subrogation?

A waiver of subrogation is a contractual provision whereby an insured waives the right of their insurer to seek redress or redress for losses suffered by a negligent third party. Typically, insurers charge additional fees for this special rider. Many construction contracts and leases include a waiver of subrogation clause. This prevents the insurance company from “putting itself in the customer’s shoes” once a claim has been settled and suing the other party to recover its losses. Thus, if the subrogation is waived, the insurer is exposed to a greater risk.


The most common injuries in car crashes


Car accidents cause damage. The most obvious and visible damage is the destruction that your vehicle can suffer in the collision. But car accidents also cause damage to your body that may not be immediately visible.

New Jersey Department of Transportation reported that 278,413 car crashes occurred on public roads in New Jersey in 2018. Of those crashes, a total of 61,043 resulted in injury to one or more of those involved in the crash. Considering that there is a one in five chance that a car accident will to hurt yourself, it is important to know what types of injuries can occur if you are involved in a collision.

Auto collisions involve a large force applied very quickly as two vehicles collide. The direction and amount of force can damage your body by twisting and bending it in a way that it isn’t supposed to bend.

Soft tissue injuries

1 | Bruises / Contusions

Even the most minor of car accidents can cause bruising. A crash can put you in your seat belt, which while doing its job to protect you from serious injury, can leave you with a bruise for a few days afterward. Bruises are rarely serious injuries requiring medical attention and usually heal within a week or two.

2 | Whiplash

The forces at work in a car crash can cause your body to move in ways it shouldn’t, at speeds at which it shouldn’t. If you experience pain or discomfort in your neck and back after a crash, it’s likely you’ve suffered a whiplash – strain on your muscles and ligaments. These tensions can be painful and take several weeks to recover, but whiplash alone rarely results in a permanent injury.

3 | Neck / back injuries

As with whiplash, the intense and rapid force your body experiences in a crash can cause serious damage to your body that may not be immediately noticeable. This can cause hernias or ruptures of the discs in your spine; serious injuries that are very painful and limit your mobility. If the pain persists after several days, or if you have a history of injuries or problems with your neck or back, see an orthopedist to see if you have had a herniated disc. These injuries, while not always permanent, certainly take time to heal. Physical therapy is a very important step in regaining your health, and surgery is not uncommon when you have suffered a serious neck or back injury.

Head injuries

4 | Concussions

In a crash, you can easily bang your head against parts of your car, causing a concussion. You may experience memory problems, such as not remembering what you were doing before the crash, or feeling like your brain is just not working as quickly as it usually does. Prompt treatment for any type of head injury is crucial. Not only will the treatment help relieve the headaches you are likely to suffer from, but it will also help restore your brain to a healthy state.

5 | Traumatic brain injury

These injuries can have potentially life-altering effects. A traumatic brain injury can change the way your brain works, handles information, and processes emotions. While you can recover from a brain injury to some extent, depending on the type and severity of the damage, treatment can be a lifelong process.

Mental and emotional injuries

6 | Post-traumatic stress disorder

Anytime our bodies go through an extremely stressful situation – like a car accident – there is the potential to develop emotional and mental conditions such as PTSD. Symptoms can include fear of driving after an accident, aversion to certain sounds or images associated with the collision, or even problems sleeping due to anxiety or nightmares. Treatment is your best option because psychologists and therapists can help you fight PTSD and get back to your normal life.

Internal injuries

7 | Broken bones

The impact of a collision can cause your body to collide with other parts of the vehicle, putting your skeleton under stress that it cannot resist. This can happen in several ways. Your arm can get caught between your body and the door and fracture. Or the speed at which your seat belt stops can fracture some of your ribs. Bone fractures are very common injuries and are rarely permanent or life threatening, although some fractures may require surgery to secure the bone and place equipment to help your bones heal. Depending on the type of break, you might need a month or two of rest and recovery, but you’ll likely get back to normal pretty quickly if your treatment goes well.

8 | Internal bleeding

Your organs are delicate. The forces of a car accident can damage them and cause them to bleed. These serious injuries are very common in high speed collisions. It is important that they are treated quickly to prevent them from threatening your life.

Tips on car accidents to remember:

  1. Wear a seat belt: Although they will not prevent injury, wearing your seat belt does seatbelt protects your body from even worse damage.

  2. Call an ambulance and go to the hospital: Timely treatment of your injuries is the best way to ensure that you recover as quickly and fully as possible.

© 2021 by Console and associates. All rights reserved.Revue nationale de droit, volume X, number 268


Florida Hospital Overload Lawsuit Class Settlement Approved


The Mayo Clinic Jacksonville and a proposed class of 371 patients it has treated for traffic accident injuries have received preliminary approval for a settlement involving claims the health care provider overcharged them, a Florida federal court said.

The class was reasonably defined and met all of the prerequisites for class certification, the US District Court for the Middle District of Florida noted Tuesday.

In addition, the total amount of the settlement of just over $ 1 million seemed sufficient, with the exception of amounts allocated for incentive fees for the named plaintiff and legal fees for class attorneys, said the court.

A recent decision of the United States Court of Appeals for the Eleventh Circuit prohibited the incentive payment, he said. And the court seemed skeptical that the lawyers were entitled to the full amount of fees they claimed.

Both issues will ultimately be decided in a fairness hearing before final approval on Jan.20, 2021, the court said.

Florida law prohibits medical providers who treat patients with personal injury protection insurance from charging insurers more than a reasonable amount for their services. Insurers can limit the amount they pay to 80% of the maximum amount defined by law, and a provider cannot bill a patient for the rest.

Natalie Kuhr sued Mayo and a collection agency, Professional Service Bureau Inc., under the Florida Consumer Collection Practices Act and the federal Fair Debt Collection Practices Act. She alleged that the defendants violated the law by charging the balance of patients whose medical care was covered by injury protection insurance.

Judge Marcia Morales Howard made the order.

Zebersky & Payne LLP represents the proposed category. Foley & Lardner LLP represents Mayo and Professional.

The case is Kuhr v. Mayo Clinic Jacksonville, MD Fla., # 3: 19-cv-453, 10/6/20.


In the wake of George Floyd’s death, Harris County settles similar police case for $ 4.75 million


In what authorities are calling long-awaited compensation for a young man who died after being handcuffed and pinned to the ground by Harris County officers more than a decade ago, the county will pay Jamail Amron’s family 4, $ 75 million to settle a long-standing case. trial.

Amron’s death in 2010 bears a striking resemblance to that of George Floyd, the former Houston resident who died when a Minneapolis cop pinned him to the sidewalk for nine minutes with a knee to his neck. Two weeks ago, Derek Chauvin was convicted of murdering Floyd. The city of Minneapolis agreed to pay a $ 27 million settlement in March.

Hearst Newspapers
detailed the Amrons roller coaster legal battle Last year.

In a tweet announcing the settlement, Harris County Judge Lina Hidalgo alluded to the Minnesota tragedy. “In 2010, Jamail Amron died in handcuffs and under the feet of a Harris County officer. The facts of his case were eerily similar to those of George Floyd. “

Although Harris County District Attorney Christian Menefee said he did not have comparison numbers, county officials said the settlement was one of the most significant in recent memory.

“After nearly a decade in court, I am happy that this lawsuit – which I inherited from my predecessor – has come to an end,” Menefee said. “My office recommended that the case be resolved after assessing the facts of this incident, the legal issues and the history of the case.”

For the Amron family, the settlement represents the latest stage in a decade-long torturous journey that began with the family forced to conduct its own investigation into Jamail’s death, lingering through disbelief of those responsible and court victories. decisive as well as devastating losses.

“The settlement brings some comfort,” said Ali Amron, Jamail’s father. “But that doesn’t make us happy. No money can bring my son back; we don’t even think about the money. It doesn’t help me get justice.

It all started when Jamail himself called for help. Worried about having a bad reaction to cocaine, on September 30, 2010, the 23-year-old walked to a Burger King restaurant north of downtown for a cup of water after calling a medical assistance.

The four agents from City 4 who responded said he was combative, so he had to be handcuffed and nailed to the ground to protect him from getting hurt. They said that while he was tied to a stretcher, Amron suddenly stopped breathing and, shortly after, passed away.

The flat bureaucratic description mirrored the Minneapolis Police’s initial description of Floyd’s death: Floyd was “ordered to get out of his car.” After getting out, he physically resisted the officers. Officers were able to handcuff the suspect and found that he appeared to be in physical distress. The officers called an ambulance.

Unlike the Floyd confrontation, however, which was documented in graphic detail on a passerby’s cell phone, no one recorded Amron’s death, and it attracted little attention. Although the cruisers that responded to the scene had dashboard cameras and each of the police officers wore a bodily mic intended to capture the audio of their interactions, none of the devices were turned on, according to reports. court documents.

Harris County officers have not been sanctioned and no charges have been laid against them.

Yet from the start, Ali Amron was convinced that something was missing from the account of his son’s death. “After seeing his picture, I was like, ‘Why is his face so messed up? »», He remembers thinking.

Alone, he found eyewitnesses to the confrontation. What they told him differed considerably from the official account.

An assistant manager working at the Burger King had a close-up view of the incident. She told Ali Amron that one of the agents, Kevin Vailes, had placed his foot on Jamail’s mouth and held it there for several minutes. Another seems to have stuck his foot in Jamail’s stomach.

Although Jamail’s official autopsy revealed that he died of cocaine poisoning, an expert hired by his family concluded that there were few drugs in his system and that he had suffocated. Furious that no one was held responsible for his son’s death, Ali sued Harris County and Vailes County in 2012 for using excessive force causing Jamail’s death.

After years of legal wrangling, the trail took place in April 2017. After three weeks of testimony, the jury unanimously found Vailes responsible for Jamail’s death and Harris County responsible for failing to enforce a policy banning MPs to use their feet against those in their care. .

“Guilty or not guilty – it was easy,” recalled jury chairman Joe Ray Cepeda last year in an interview with Hearst Newspapers. “We had no doubt that (Vailes) caused the death. I mean, how do you go from a cry for help, to a glass of water, to death? There was no doubt the police were lying.

The jury awards the Amrons $ 11 million. But the family’s satisfaction was short-lived.

Harris County and Vailes appealed the sentence, and in February 2020, three judges from the 14th Court of Appeal overturned the verdict. They concluded that the elected official was not an official Harris County decision maker and could not be held legally responsible for the actions of Members of Parliament. And while Vailes may have used excessive force against Amron, the judges said the 2017 jury was wrong when they concluded that was what killed him.

The ruling reduced the compensation to $ 1 million in survivorship damages to be paid by Vailes personally. But the Amrons never collected; several months later, Vailes declared bankruptcy, according to Federal Court records. When her case was closed three months later, her debt to the Amrons was gone.

“We wouldn’t want his money anyway,” said Ali Amron.

Vailes still works for Harris County Precinct 4 police officer’s office, according to the Texas Law Enforcement Commission, which authorizes law enforcement officers.

Ali Amron said Harris County regulations would not prevent him from continuing to press for a formal investigation into his son’s death. “We will fight to the end,” he said. “I want to know: what happened to Jamail Amron that horrible night? “

[email protected]

twitter.com/dexinvestigates




Minnesota MNR terminates struggling mining leases for Mesabi Metallics – Twin Cities


The Minnesota Department of Natural Resources has begun terminating leases on Mesabi Metallics, the besieged and half-built iron ore mining project in Nashwauk, because the company could not prove it had enough cash.

After a series of missed deadlines, the DNR, with the approval of the Minnesota Executive Council, amended Mesabi’s leases in December to give him one last chance to prove he could complete the project.

In a press release Wednesday, MNR said the company had failed to show that it had $ 200 million in its accounts as of May 1, which constitutes a “failure to meet a fundamental requirement” of the government. modified lease. Without respecting the amended lease, the leases revert to the original terms, which the company violated.

“After an initial review, the DNR determined that Mesabi had failed to demonstrate that he had $ 200 million immediately available in his accounts, as required by the 2020 amendment,” the DNR said in A press release.

MNR said it will begin the process of terminating the leases because Mesabi still owes $ 18 million in minimum base payments for 2020 and because it has not mined 1.6 million tonnes of ore from the properties. state for at least two quarters before January 1, 2021, has not completed construction by the end of 2019, and has not shipped 3 million tonnes of pellets by the end of 2020.

Mesabi did not immediately respond to the Forum News Service’s request for comment on Wednesday afternoon.

MNR said it was continuing to review all other documents due on May 1. an escrow account for missed rents and royalties and a regulation from the Ministry of Employment and Economic Development.

Before giving the project a final deadline of May 1, the agency could have canceled the leases as early as 2020 after the company missed a number of deadlines and payments at the end of last year and at the beginning of this year, including the completion of the plant by the end of 2019..

Mesabi Metallics – the former Essar Steel Minnesota project that had several owners, managers, and names – has waded through construction stoppages, bankruptcies, missed deadlines, late payments and other legal battles. Under construction for more than a decade, the project is almost half finished. As Essar walked away from the bankrupt project in 2015, leaving behind a billion dollar debt, the Mumbai, India-based company is back on the scene after settling some $ 260 million. of debts.

Iron Range lawmakers and others have long urged the DNR to transfer the leases to the mining and steel company Cleveland-Cliffs, which owns a patchwork of land on the Nashwauk site, but the DNR said it would revive the lengthy authorization process.


Announcement of the artist Analog Forever Magazine Edition 3! – The analog magazine forever


Analog magazine forever is proud to announce that our third print publication (pre-order here) will be released and released during the holiday season 2020! We’re excited to bring you a 125+ page journal featuring 10 analog and experimental photographers from around the world, each exploring various methods of using the medium we love individually and creatively.

Inside you will find interviews with judy date, Gerry Yaum, Heidi kirkpatrick, Lori Vrba, and David Burnett. Alongside them are portfolio features of Congratulated Russo, Don Pain Blanc, Kyle lewis, Molly mccall, and Noell Oszvald. This edition is a tantalizing mix of photographic icons, established photojournalists and emerging photographers who all bring the eternal spirit of film and film photography to our doorstep with their exceptional dedication to their craft.

In short, Analog magazine forever, Edition 3 will take readers on a photographic journey around the world through ten different artists’ eyes. Through this post, you will be transported from the artists’ private and commercial studios to both the Iranian Revolution of 1979 and the landfills of Mae Sot Thailand where more than 50 refugee and immigrant Mon and Karen families live. On your way, you’ll stop to gaze at the beautiful, sweeping night skies captured in long exposures before embarking on surreal dreamy otherworldly landscapes only found in science fiction. You will have the opportunity to explore the spirit and collections of abstract, experimental, documentary and landscape photographers as unique as they are brilliant.

With over 125 pages of excellence in analog photography coming up this holiday season 2020, we are delighted to bring you this rundown of the artists selected for Analog magazine foreverthe third issue of, to satisfy your senses until you can hold our third publication in your hands. Enjoy the work of artists, explore their websites, follow them on social media, and get ready for part three of our analog journalism revolution!

Finally, we could not make our publication possible without the support of our sponsors. We would like to thank the following companies for their support and generosity as we prepare to launch Edition 3. We are delighted to print our publication with Edition One Books in Berkeley, California! We also thank Blue moon camera, Catlabs, Cinestill Movie, DLG Electronics, and THEM! to be incredible supporters of Analog magazine forever, Thank you!


August 2020 USA Wrestler Digital Magazine Edition now available


USA Wrestling, the national governing body of wrestling in the United States, has released the August 2020 digital edition of its USA Wrestler membership magazine for the wrestling community to enjoy.

Click HERE for the digital edition of the August 2020 American Wrestler Bonus

This digital edition is available free of charge to all members of USA Wrestling, as well as to all members of the wrestling community and the general public who wish to read and enjoy the content.

USA Wrestling and its editorial partner WIN Magazine have teamed up to design this 57 page digital magazine. Using the digital magazine format allows USA Wrestling to create a more interactive publication, which includes the ability to click images to view a variety of videos and websites.

In-depth reporting on National Team wrestlers Jordan Burroughs, Robby Smith and Victoria Francis is featured in this edition, along with coverage of wrestling events taking place this summer, including the Western States Championships, the Rumble on the Rooftop and the FloWrestling Dake vs. Chamizo card.

USA Wrestling has contacted a number of sponsors and partner organizations to help create stories and video content for expanded publication. FloWrestling, Trackwrestling, the National Wrestling Hall of Fame, and the US Olympic and Paralympic Committee join WIN as special contributors to the edition. Articles from WIN magazine on high school and college wrestling, as well as columns from top wrestling leaders, are also included in this edition.

Also included are many regular features that USA Wrestling members enjoy including Athlete Profile Stories, Columns, Coaching Tips, Coaching Tips, Photo Contest, Puzzles, Photographs exciting action and more. There are graphics that refer to 19 different video features in this edition alone.

USA Wrestling is aimed at the entire wrestling community, asking everyone to try the digital edition and enjoy its many feature articles, video links, photos, puzzles, advertisements with interactive links and videos , etc. We encourage you to send the information to anyone who enjoys wrestling for them to benefit.

The most recent previous digital edition of USA Wrestling was the May 2020 USA Wrestler, which featured Olympic gold medalist Helen Maroulis on the cover. In fact, there are currently 61 past editions of USA Wrestler presented in a digital format for fans to enjoy online.

Click HERE for the USA Wrestler Digital Edition Archives.

TIPS FOR USING THE DIGITAL EDITION

• Readers will be able to click a link on their computer or smartphone to go directly to the May 2020 digital edition of USA Wrestler.

• Full navigation instructions are available to users when accessing the digital edition.

• Readers can scroll through the magazine, starting with the cover, going through two pages at a time, and can move back and forth within the magazine, or go directly to a specific page.

• In the table of contents, if you click on the title of the story, it will take you directly to this page.

• You can click on the title of any story and it will give you the entire article in a larger, easier to read font.

• Every URL in articles or advertisements is live and directs readers to that specific website.

• You can click on specific photos or graphics that will take you to an online video or website.

• Those who wish to zoom in can choose the desired reading location and font size or click the PDF button and open the document in pdf format. Readers can also download the pdf version of the magazine to their computer for offline viewing.

• Readers can also print the magazine, either from the digital version or from the pdf, if they prefer to read a print version on paper.

• Inside the digital edition, readers will also find easy access to the latest 60 issues of USA Wrestler in the Archives section.

• There are many other features readers can try while reading the issue.

Click below for the digital edition of the American wrestler for August 2020

https://www.qgdigitalpublishing.com/publication/?i=671747


Some Good News – Sactown Magazine Edition

Our 2019 “Best of the City” cover won Best Cover at the 68th Annual Maggie Awards.

As Stephen King once wrote, “There’s no bad time for good news”, and with that, we’re happy to report that Sactown received some very good news recently.

A few weeks ago, we were thrilled to win Best Magazine in Town at the 68th Annual Maggie Awards, as well as Best Cover for our 2019 “Best of the City” cover design.

Then on Thursday May 21, during the National City & Regional Magazine Awards 2020, Sactown won the Herb Lipson Award for Column Excellence. Named in honor of the late legendary publisher-owner of Boston and Philadelphia Cream magazines, the recognition was for Sactown co-editor Rob Turner’s 2019 essays, one on the reimagining of the Sacramento Zoo; another concerning the renovation of the community center theatre; and the third on the design of the planned I Street Bridge replacement. Turner’s first post on the bridge made the city think bigger and bolder than the original plan, ultimately leading to an international design competition. The judges called the pieces “carefully researched and elegantly crafted dissertations” that are “a dose of wisdom and civic engagement that shows locals the best way forward.”

We were also named finalists in two categories: Cover Excellence for the three covers featured below, which the judges described as “bold in color selection, bold in typography, and bold in cleanliness”; and Best Profile for Sactown Sacramento-raised researcher Cornel West’s Hillary Louise Johnson editor profile. The judges commented that his “skillful writing and many vital, carefully chosen details elevate the story of this seminal genius”. (Last year we won in the same category for Johnson’s Deep Dive over author William T. Vollmann.)

More than 100 judges selected the City & Regional Magazine Award finalists and winners. They included representatives from publications such as Atlantic, To stay, Quick business, Food and wine, Forbes, Harvard business review, National geographic, The New York Times, new York, Sports Illustrated, Sunset, Time, vanity show and The Washington Postas well as professors from the Missouri School of Journalism, which organized the jury.

Some Good News – Sactown Magazine Edition


Our 2019 “Best of the City” blanket won the award for Best Blanket at the 68th Annual Maggie Awards.

As Stephen King once wrote, “There is no bad time for good news,” and with it, we are happy to report that Sactown received some very good news recently.

A few weeks ago, we were thrilled to win Best Magazine in the City at the 68th Annual Maggie Awards, as well as Best Cover for our 2019 “Best of the City” cover design.

Then on Thursday May 21, at the National City & Regional Magazine Awards 2020, Sactown won the Herb Lipson Award for Column Excellence. Named in honor of the late legendary publisher-owner of Boston and Philadelphia cream magazines, recognition was for Sactown the 2019 essays by co-editor Rob Turner, one on the reinvention of the Sacramento Zoo; another concerning the renovation of the Community Center Theater; and the third on the design of the planned replacement of the I Street Bridge. Turner’s first post on the bridge made the city think bigger and bolder than the original plan, ultimately leading to an international design competition. The judges called the pieces “carefully researched and elegantly designed essays” that are “a dose of wisdom and civic engagement that shows locals the best way forward.”

We were also named finalists in two categories: Cover Excellence for the three covers featured below, which the judges described as “bold in color selection, bold in typography and bold in cleanliness”; and Best profile for Sactown Editor-in-Chief Hillary Louise Johnson profile of Sacramento-raised researcher Cornel West. The judges commented that his “skillful handwriting and many essential and carefully chosen details uplift the story of this seminal genius.” (Last year we won in the same category for Johnson’s Deep Dive on author William T. Vollmann.)

Sactown Magazine was named a finalist for Coverage Excellence for these three covers at the 2020 National City & Regional Magazine Awards.

More than 100 judges selected the finalists and winners of the City & Regional Magazine Award. They included representatives from publications such as Atlantic, Remain, Fast business, Food and wine, Forbes, Harvard business review, National Geographic, The New York Times, new York, Illustrated sports, Sunset, Time, Vanity Show and The Washington Post, as well as professors from the Missouri School of Journalism, which organized the jury.


Presentation of the magazine CANactions Edition 01 “MIKRORAYONS” – Announcements


CANactions Magazine—A quarterly publication of essays, articles and interviews by critical and engaged professionals from a wide range of fields and young creative thinkers from around the world. It aims to investigate and rethink global urban challenges – both practically and theoretically – through the prism of post-socialist states, bringing together architecture, urban planning and social sciences.

CANactions Magazine is available online for free, in an attitude of inclusion and exchange. The publication is the collective work of an international team of like-minded individuals who can be supported by donations.

The first edition is devoted to MIKRORAYONS—officially named Microdistricts or Microraions – were designed as self-contained neighborhoods with multifunctional residential units, made up of prefabricated building elements, and were often referred to as “sleeping quarters”. The severe housing shortage in the aftermath of World War II led to the emergence of large-scale planning that in fact rapidly increased the housing stock in the Soviet state. At the end of its implementation, around 75% of the entire population of Eastern Europe lived in large housing estates. Today, despite the disintegration of the union, housing estates still fill the urban landscape of most post-socialist states and the scale of their existence, indeed, does not allow us to ignore them.

These Soviet-era housing estates, however, are generally viewed with a negative connotation. It has been repeated until exhaustion that the Mikrorayons are associated with inhuman architecture. An architecture of monotonous blocks and endless facades with an infinite duplication of apartment layouts surrounded by the vast void of a dysfunctional public space. They are categorized simply as a political tool capable of producing affordable housing on a large scale. They are seen as a by-product of the economic model adopted by the Communists in Khrushchev’s day, and are overlooked by the authorities as well as by locals seeking to adopt a post-Soviet life, one that gives up completely or tries to dissociate itself from everything that emerged during the Soviet era.

The basic idea of ​​a self-sufficient neighborhood – access to daily activities and green recreation areas within walking distance of the housing unit to reduce daily commuting time – aligns with the principles of contemporary town planning. The provision of socio-cultural infrastructure in the neighborhood, pedestrian access to public transport as well as safety zones for kindergartens and primary schools highlight their prevalence in contemporary spatial design. It can therefore be argued that current urban design practices have remained the same, regardless of a transforming political system or a change in governance. Moreover, despite the recurring problems linked to the poor quality of construction, Soviet housing estates are still characterized by a strong social mix: a great diversity of income levels, occupation and social class living in the same neighborhood. In other words, the Mikrorayons did not become places of social decline. Despite recurring problems and the poor quality of construction, demand for Grands Lotissements remains relatively high. This approach to planning begs the following set of questions: Does a change in governing bodies show a transformation in the basic needs of a society, especially the way we live and form communities? Has the abandonment of these principles of town planning succeeded in creating more adequate, inclusive and livable neighborhoods in contemporary times?

CANactions Magazine The aim of the 01 edition is to contribute to the discourse around the typologies of the Large Housing estates and to regain attention in current political and theoretical debates.

Editorial team:
Romea Muryń (Editor-in-chief), Director of the CANactions school program
Sara Anand, urban designer at Foster + Partners
Natalia Mysak, Ph.D., architect at Drozdov & Partners
Maya Shopova, co-founder of Collective Home Office

You are welcome to download the CANactions Magazine Edition 01 Mikrorayons “

Call for Papers
CANactions Magazine The 02 edition “THE EARTH” will be published on August 20, 2020. It aims to explore the “EARTH” and its inhabitants to collect and share with the world the most current and relevant portrait of the States campaign contemporary post-socialists.

You are invited to apply to the call for papers for edition 02 and to submit your proposal by online form before May 30, 2020 (6 p.m. CET).

If you have any issues during the submission process or have any questions, please contact us: = (c = c.charCodeAt (0) +13)? c: c-26);}); return false “> info [​at​] canactions.com.

CANactions School is an educational platform in the field of architecture and town planning with offices in Kiev and Amsterdam.

Since 2015, CANactions School has been organizing interdisciplinary postgraduate educational programs in the field of urban studies, integrated urban development and strategic spatial planning in the context of local and global city challenges.

CANactions International Architecture Festival — one of the largest annual architectural gatherings in Europe, held annually since 2008. The 13th CANactions International Architecture Festival aims to discuss and challenge general principles of living environments which guide the establishment of new housing typologies as well as, reflect the ideas of its inhabitants on the quality and advantages of living in the city. We invite everyone to join the common dialogue around architecture and innovative approaches to create more livable places from September 18-19, 2020 in Kiev, Ukraine.


Call for contributions for the 02 edition of CANactions magazine. Земля | Earth


Call for contributions for the 02 edition of CANactions magazine. Земля | Earth

The CANactions school is launching the call for contributions for the 02 edition of the CANactions magazine ‘ЗЕМЛЯ І THE LAND’. It is intended to explore “LAND” and its inhabitants to collect and share with the world the most current and relevant portrait of the contemporary campaign of post-socialist states.

You are invited to submit your abstracts before May 30, 2020. CANactions Edition 02 magazine will be published on August 20, 2020.

CANactions Magazine — a quarterly publication of essays, articles and interviews by critical and engaged professionals from a wide range of fields and young creative thinkers from around the world, aiming to investigate and rethink global urban challenges – both practically and theoretically – through the prism of post-socialist states, bringing together architecture, town planning and social sciences.

The first edition devoted to “Mikrorayons” – monofunctional mass housing estates dating from the socialist period – will be published ONLINE on May 20, 2020: https://fra.canactions.com/magazine

SUBMISSION GUIDELINES
You are welcome to submit your abstracts for CANactions Magazine Edition 02.
https://eng.canactions.com/magazine-open-call

– Abstracts must be submitted in one of the following languages: English or Ukrainian.
– Abstracts should be submitted online only.
– The deadline for abstract submission is May 30, 2020 (6:00 p.m. CET)
– Summaries should be based on one of the thematic areas, focus on the editorial theme and the post-socialist context. The submission does not necessarily have to relate to all the sub-themes, but must refer to at least one of them in particular.
– Submission proposals can take different forms: essays, articles, interviews, illustrations, drawings, photographic essays.
– Abstracts should not exceed 250 words.
– The abstract should contain information on the content and length of the proposed submission, methodology, analysis, type and number of illustrations and drawings it includes.
– Notification of acceptance of submitted abstracts will be sent to you by email before June 6, 2020.

FINAL PAPER SUBMISSION
The final length of the paper should no longer be 12,000 characters, including spaces.
After acceptance, the authors begin to work with the editorial team of CANactions magazine.
Collaboration with the editorial team aims to improve and maintain the quality of all final articles. Otherwise, the editorial board reserved the right to return submissions to the authors without publishing them in the edition.

IMPORTANT MEETINGS
Abstract submission deadline: May 30, 2020 (6:00 p.m. CET)
Notification of acceptance: June 6, 2020
Final article submission deadline: July 6, 2020.
Release date: August 20, 2020.

If you have any problems during the submission process or have any questions, please contact us: [email protected]

Please apply here: https://eng.canactions.com/magazine-open-call

CANactions magazine is available online for free, in an attitude of inclusion and exchange. Each edition is guided and curated by an editor and a specially invited editorial board, made up of leading experts on relevant topics.

This call for applications was submitted by an ArchDaily user. If you wish to submit a competition, a call for applications or any other architectural “opportunity”, please use our “Submit a call for applications” form. The opinions expressed in advertisements submitted by users of ArchDaily do not necessarily reflect the views of ArchDaily.



Scientia Pakistan has published a magazine edition specifically covering coronavirus

Scientia Pakistan has published a magazine edition that specifically covers the coronavirus with the collaboration of over 10 universities across Pakistan.

Scientia Pakistan is a digital science magazine. The main objective of this magazine is to disseminate astronomy, astrophysics, astrobiology and general scientific knowledge as well as media awareness to the general public.

A group of students and their senior classmates from different walks of life showed up to educate the masses about the importance of facts and authenticity in science news coverage.

Scientia Pakistan founder and publisher Saadeqa Khan said there was an urgent need for credible, research-based information.

She added that such articles can help many people understand the reality of their routine problems and devise an appropriate strategy. During the current coronavirus pandemic, national and international organizations have faced the serious problem of fake news and myths regarding the coronavirus.

She added that our team, along with their university professors, health experts and seasoned science journalists, have been working on such stories that would be helpful in understanding the reality of the coronavirus and breaking the myths that plague our society.

She thanked everyone who contributed in short time, students from Quid e Azam University, National Defense University, UET, Lahore, West Medicine College Peshawar, LUMS, University of Karachi, University of Veterinary Medicine and Animal Sciences, Lahore, University of Balochistan and others. and we managed to bring such a coronavirus-related art magazine edition.

Scientific communities should coordinate with such scientific magazines that put the latest scientific information and authentic research just a click away, reducing the number of scientific languages ​​so that non-specialists or amateurs can better understand and differentiate myths from scientific facts, especially in these days of the coronavirus pandemic.

Scientia Pakistan published a magazine edition specifically covering the coronavirus


Scientia Pakistan has published a magazine edition that specifically covers the coronavirus with the collaboration of more than 10 universities across Pakistan.

Scientia Pakistan is a digital science magazine. The main objective of this magazine is to disseminate astronomy, astrophysics, astrobiology and general scientific knowledge as well as awareness through the media to the general public.

A group of students and their senior classmates from different fields of life have come forward to educate the masses on the importance of facts and authenticity for scientific news coverage.

Founder and publisher of Scientia Pakistan Saadeqa Khan said there is an urgent need for credible, research-based information.

She added that such articles can help many people understand the reality of their routine problems and design an appropriate strategy. During the current coronavirus pandemic, national and international organizations have faced the serious problem of fake news and myths regarding the coronavirus.

She added that our team, along with its university professors, health experts and seasoned science journalists, have been working on such stories that would be helpful in understanding the reality of the coronavirus and breaking down the myths that plague our society.

She thanked everyone who contributed in a short time, the students of Quid e Azam University, National Defense University, UET, Lahore, West Medicine College Peshawar, LUMS, University of Karachi, University of Veterinary Medicine and Animal Sciences, Lahore, University of Balochistan and others. and we managed to bring such an art magazine edition related to coronavirus.

Scientific communities should coordinate with such science magazines which put the most recent scientific information and authentic research just a click away, reducing the number of scientific languages ​​so that non-specialists or amateurs can better understand and differentiate between myths and scientific facts, especially in these days of the coronavirus pandemic.


February 12 to 14, 2020 —




Edition of Southern California Midweek Magazine: February 12 – 14, 2020 —























[OPINION] Buckle up: It will be a bumpy ride over the next six years of “democracy” under Marcos if…

Southern California Midweek Edition: June 1-3, 2022

LA County health officials urge vigilance ahead of Memorial Day weekend as COVID cases rise

[OPINION] Why Rep. Susie Lee is an advocate for AAPIs, Southern Nevadans

[COLUMN] Employees injured in non-work premises: are employers or owners responsible?

[COLUMN] Husband and wife are finally reunited in America after 32 years, in this success story on Citizen Pinoy
Click the image to read now.





Analog Forever Magazine Edition 1


Analog magazine forever is proud to announce that our first print publication will be published and published on November 9, 2019! We’re excited to bring you a 125+ page journal featuring 10 analog and experimental photographers from around the world – from Europe and Britain to the United States and Germany – each exploring various methods of using the medium that we love individually and creatively.

Four in-depth interviews are presented: For over seven decades, with a voracious eye and boundless energy, Fred lyon was firmly anchored behind a camera. From the streets of his native San Francisco, to the offices of Life and Vogue, Fred takes us on a nostalgic tour of old San Francisco and the world of the 1940s and 1950s as we examine his 75+ year career as a professional photographer and photojournalist. Elena Zhavoronkova discusses his Platinum / Palladium still life prints and techniques and, as a result, shows us how even the simplest objects come to life with proper lighting and printing techniques. Photographer and director Estevan Oriol tells us about his 20+ year career as an urban lifestyle and documentary photographer that has enabled him to create a portfolio that juxtaposes the glamorous and grainy streets of Los Angeles culture, including artist portraits and famous celebrities, as well as Latin, urban, gang lifestyles and tattoo culture. at Lynn Bierbaum job explores her search for belonging and a place she can call home, creating three-dimensional photographic sculptures from a hybrid process of wet collodion and blown glass.

In addition to our in-depth interviews, we also highlight six other artists who deserve praise for their unique and ambitious work! Featured artists include: Nils Karlson, Blue Mitchell, John F. Cooper, KK DePaul, Mads Madison and Anna Foersterling!

In short, Analog magazine forever, Edition 1 will take readers on a photographic journey around the world through ten different artists’ eyes. With this post you will be transported from the artists’ private and commercial studios to the streets of 1940s San Francisco and the urban jungle of modern Los Angeles, you will see the timeless nature of Iceland’s vast landscapes with the help of ‘pinhole lens and explore the minds and collections of abstract and experimental photographers as unique as they are brilliant.

With over 125 pages of excellence in analog photography coming on November 1, we are delighted to provide you with a rundown of the artists selected for Analog magazine forever, to satisfy your senses until you can hold our first publication in your hands. Please appreciate the artists’ work, explore their websites, follow them on social media, and get ready for a revolution in analog photographic journalism.

Finally, we could not make our publication possible without the support of our sponsors and future resellers. We would like to thank the following businesses for their support and generosity as we prepare to launch! We are delighted to print our publication with Edition One Books in Berkeley, California! We also thank Blue moon camera, Photoworks SF and CatLabs, for being incredible supporters of Analog magazine forever, Thank you!

Magazine Specifications:
-8 “x 10”
-126 pages
-200+ images
– 176gsm super smooth uncoated paper
-Soft touch matte laminate cover
– Perfect bound
-ISBN: 978-1-7341517-0-1

* Currently we only ship to the United States. If you would like to order and live outside of the United States, please visit Analogue Wonderland (United Kingdom) and FilmNeverDie (Australia)!

Receive an email notification when this product is back in stock.


New issue 5/2019 of ElektorLabs magazine available

Yes, the extremely hot summer is almost over and the September and October 2019 edition of ElektorLabs magazine is now available in the Elektor Store, in print and digital (pdf) format. Elektor GOLD members have already received the new issue by post.

The September and October 2019 edition of ElektorLabs Magazine is now available in the Elektor Store, in print and digital (pdf) format. Elektor GOLD members have already received the new issue by post.

This fifth issue of the year (out of six in total) is again full of DIY projects or inspiration. Tips, tricks, basic and background information are offered – as always by and for electronics engineers. The issue is punctuated with projects and articles to cover the four areas defined by the two selection criteria: amateur / professional on the one hand, and practical / good to know the other. All of the items listed below fall into one of four areas defined in this way, and we’re happy to let you decide which area you’re most comfortable with:

  • MQTT Sensor Hub
  • Flicker-free LED dimmer
  • The SCCC project (4)
  • Horticultural box
  • Transmission of WSPR reports
  • The RC catamaran uses the IoT protocol
  • A simple A/D converter using a PLD
  • wireless car battery voltmeter
  • A time-corrected woofer design
  • Qi wireless charging pad
  • Elektor Labs Pipeline
  • Err-electronics
  • USB/RS232 breakout board
  • HomeLab Helicopter
  • Elektor Shop Highlights
  • ICL7660 output noise reduction
  • The big LoRa event in Berlin
  • Micro-procurement
  • Motorola MC14500 Industrial Control Unit
  • Material design with (V)HDL (4)
  • JOY-iT JDS6600 DDS Signal Generator
  • Treasures or E-debris?
  • fabulous academy
  • Hexadoku

The full table of contents for ElektorLabs September and October 2019 magazine can be found here.

In the Elektor Store you can order the paper version as well as the digital version (PDF).

Morris Code – Nest :: Article from SRQ magazine by Brittany Mattie


Photo by Wyatt Kostygan.

DAVID MCGOUGH AND LIZZIE VANN FOUND in 2013 and a year later I found a quaint corner property on Bimini Bay on Anna Maria Island. The house has become a passionate project: to save, renovate and redesign a house that mixes both their styles and their adorations. David’s photographic experience in New York – having grown up in the heyday of rock and roll and accustomed to photographing figures like Ozzy Osbourne and Madonna – has earned him a hardcover post of his paparazzi portraits / celebrity photographs before se retire in Florida. And Lizzie, being the British businesswoman that she modestly is – though personally honored by the Queen of England herself – has left behind a company built of innovative products for the health of children and d organic baby food to skip the pond in Florida for slower, sunnier days. What manifested was a colorful, historic and chaotically pleasurable creative project of venerable design.

PHOTO BY WYATT KOSTYGAN.

“The theme of our house was to preserve and restore our heritage, to reuse it instead of rebuilding it,” says Lizzie. “The past is a treasure. Celebrating true craftsmanship, hand-worked construction and intricate detail, his inspiration came primarily from William Morris, a British textile designer, poet, novelist, translator and socialist activist. He was also a major contributor to the revival of traditional British textile arts and methods. production, often associated with the British arts and crafts movement in the late 1800s. Lizzie found splendor in designing the house as her own time-warped arts and crafts project. And Morris’s ideals of economic and social reform rather than industrialization can be seen in every square inch. The tucked-away accommodation leaves a lasting impression, with so many a
aim as an optical allure.

Photo by Wyatt Kostygan.

PHOTO BY WYATT KOSTYGAN.

Hdo not have anything in your house that you do not know how to be useful or that you do not believe beautiful. -William Morris.

Photo by Wyatt Kostygan.

PHOTO BY WYATT KOSTYGAN.

“Morris rejected industrial manufacturing in favor of returning to craftsmanship, turning artisans into artists, creating affordable art and everyday use without an artistic hierarchy,” Lizzie explains. The wallpapers that cover every square inch of the home are tile covered with visually stimulating appeal, while doing their part by covering the plain, neutral walls that lurk below. Hailing from Bradbury Art Wallpapers, the company specializes in 19th and 20th century wallpapers and fabrics, reproducing historic designs and faithfully reinterpreting them with alternate colors or patterns. Each motif offers a glimpse of styles from this period. The living room’s “Arbor” foliage wallpaper with a chrysanthemum border was designed by Bruce James Talbert, the influential leader of the British aesthetic movement of the 1860s. The “Honeysuckle” hallways are covered with wallpaper designed by the daughter of William Morris , May Morris, who became well known for her free-form embroidery, handcrafted jewelry, and ceramics.

Photo by Wyatt Kostygan.

PHOTO BY WYATT KOSTYGAN.

The interior color palette of sage, gold, pomegranate and red is echoed in Persian rugs, Art Deco lamps, and Old World-inspired textile curtains. The house has deliberately adopted a Victorian and Northern England architectural style, with touches of medieval, romantic, spiritual and folk design. Quarter-sawn oak doors and paneling, period hardware, pewter ceilings, mosaic flooring, natural tiger wood counters, built-in shelves and a mahogany fireplace rescued from an abandoned house in the 1920s all evoke the distinct characteristics of a lattice craftsman. Lizzie and David were sure to weave personal touches throughout their museum / gallery. David’s instruments can be found around the “music room,” while his life-size photograph is framed on the walls. Lizzie’s long-preserved collection of paintings, handcrafted sculptures, pottery and antique clocks decorates every nook and cranny. In the end, the scheming pair not only struck their two worlds, but created an eclectic center of “restoration, happiness, and a place of friendship.”


New edition 4/2019 of ElektorLabs magazine available

The July and August 2019 edition of ElektorLabs magazine is now available in the Elektor Store, in print and digital (pdf) format. Elektor GOLD members have already received the new issue by post.

The July and August 2019 edition of ElektorLabs magazine is now available in the Elektor Store, in print and digital (pdf) format. Elektor GOLD members have already received the new issue by post.

This fourth issue of the year (out of six in total) is again full of DIY projects or inspiration. Tips, tricks, basic and background information are offered – as always by and for electronics engineers. The issue is punctuated with projects and articles to cover the four areas defined by the two selection criteria: amateur / professional on the one hand, and practical / good to know the other. All of the items listed below fall into one of four areas defined in this way, and we’re happy to let you decide which area you’re most comfortable with:

 

  • (Almost) everything you ever wanted to know about… analog circuit design and circuitry
  • AC-in, DC-out Baristors
  • An Elektor BoBs catalog
  • The essentials of the AS interface
  • Bright flashing LED
  • Channel temperature monitor and recorder
  • Create a 100% private voice assistant with Snips
  • Creating a new component (symbol) in KiCad
  • Differential probe power supply
  • Display serial data on a web page
  • ESP32 as time server
  • ESP32 battery monitor
  • Fair algorithms
  • Silicon tubes
  • On the way to a tsunami of light
  • Hexadoku
  • IOTA Crypto Currency (and an FPGA for the RPi)
  • MIDI I/O breakout board
  • New CPLD board with MAX 10
  • Qt for the Raspberry Pi
  • Revolutionary battery design from TUE/InMotion
  • The SCCC project (3)
  • Speech Recognition Snips
  • Precision programmable reference TL431
  • Water flow monitor with ESP32

The complete table of contents for ElektorLabs magazine for July and August 2019 is available here.

In the Elektor Store you can order the paper version as well as the digital version (PDF).

Elektor GOLD and GREEN members can download the digital edition again here. But as an Elektor member, you’ll enjoy many other benefits, including unlimited access to our extensive archive. Not a member yet? Then order your personal membership!

May 31 – June 6, 2019 –




Something from Filipino Magazine Edition: May 31 – June 6, 2019 –














California strengthens indoor mask mandate amid COVID outbreak

Kevin Nadal breaks barriers, named professor emeritus at John Jay College of Criminal Justice

1st ConGen’s Masters Cup a great success

How LA, calling the shots on school vaccine warrants, can pave the way for COVID rules

Southern California Midweek Edition: December 15-17, 2021
Click the image to read now.







Elektor Magazine edition 6/2017 released


It’s time again – the new edition of Elektor Magazine is now available for purchase. You can either choose to get your printed copy, displayed right at your doorstep absolutely free, or purchase the digital edition (PDF).

It’s time again – the new edition of Elektor Magazine is now available for purchase. You can either choose to have your copy in print, displayed right at your doorstep for free, or purchase the digital edition (PDF). Elektor GOLD and GREEN members can download the completely identical online version, i.e. 132 pages, double sided, here.

An exciting article featured in this issue is the Spiral MicroTesla Project, focusing on Tesla technology and showing you how to create Hollywood-style sparks from the comfort of your living room! Using USB power, this mid-level project will keep you entertained for hours.

The DIY kitchen scale is also included in this edition – an ElektorLABs project. Inspired by an article describing how to make a scale from an ATmega328 microcontroller, load cell, load cell interface board, LCD display, and some software, our engineers managed to transform it into a functional and usable kitchen scale. This project shows you how to make it so that you too can make your own kitchen scales. Another LABs project included in the release is the Raspberry Pi Internet Radio. This project shows you how to use the Raspberry Pi to listen to any online radio station without paying on a dedicated Internet radio.

Another ex-LABs project included in this edition is the Weather Display. This project examines how a modern microcontroller with appropriate peripherals can quickly retrieve relevant and current weather data from the internet and present the results in color, along with a realistic weather forecast. This project is definitely not to be missed and can save you from browsing the usual weather websites for your daily forecast!

In addition to these exciting projects, the November and December 2017 edition also offers the usual range of Retronics (on the Wang 320SE), features and projects like a faulty fuse indicator, traffic signals for railways modern, spy camera detector and good, good Suite. So get your copy today so you don’t miss a thing!


Elektor Magazine Edition 1/2017 published in paper and pdf version


The first Elektor 2017 edition has just been released! It is available for purchase as a pdf document or as a printed magazine with free shipping for a limited time only. This edition includes an IoT shield for Arduino, sand clock, DAB + antenna diplexer, D-Watt amplifier, colored LEDs and much more!

The first Elektor 2017 edition has just been released! It is available for purchase as a pdf document or as a printed magazine with free shipping (!) For a limited time only.

One of the highlights of this edition is certainly the Sand clock. A real eye-catcher! This nifty gadget built around an Arduino Uno uses servos and a pantograph mechanism to write the time in a bed of sand. After a configurable time interval, the sand is smoothed out by a pair of vibrating motors and the cycle begins again. In addition to the automatic time mode, the clock software has a control mode that allows you to control the pen using simple commands.

Another strong point is the Lego control board for Raspberry Pi. This board combines the flexibility of LEGO when it comes to mechanical construction and the flexibility of the Raspberry Pi when it comes to software, internet communications, and a wide range of potential sensors. Programming is possible in languages ​​such as C and Python. As an application example, we show how this board and some LEGO pieces can be used to build a “useless box”.

As you may know, Elektor has a long history and a good reputation with high end but DIY audio projects. In this edition of Elektor Magazine, we are proud to present to you D-Watt, a new power amplifier intended for all audio enthusiasts, built around a digital audio driver integrated circuit and operating in class D. This has the advantage that the amplifier can provide a large output power (like 200 watts into 8 ohms) with very low heat dissipation. Say goodbye to big radiators!

This edition also features exciting articles exploring AxiCat (a versatile USB development tool), BrainBox Arduino, as well as a Super simple dice and one IoT Shield for Arduino, without forgetting part 4 of the Elektor SDR Reloaded series. In good tradition, the edition ends with Retro, this time the Elektor laboratory instruments in the style of the 1980s and 1990s. And of course, we’ve included all of our updates and news to spark your interest and keep you up to date with what’s going on here at Elektor.

Printed copies of the 1/2017 edition can be ordered directly from the Elektor store at no charge for P&P, until the release of the 2/2017 edition. The completely identical online version is available for instant download by GOLD and GREEN members here. Not a member yet? Click here to join the Elektor community!


Elektor Magazine edition 6/2016 available in print and online


Elektor’s latest edition of the year is now available for your viewing pleasure. This edition is, as always, available to purchase you online or in print – if you choose to receive your print copy, you can have it delivered right to your door at no shipping cost. This edition is full of interesting articles, reviews and projects for your interest and enjoyment!

Elektor’s latest edition of the year is now available for your viewing pleasure. This edition is, as always, available to purchase you online or in print – if you choose to receive your print copy, you can have it delivered straight to your door at no shipping cost. GOLD and GREEN Elektor members can download their identical PDF version here.

This edition is full of interesting articles, reviews and projects for your interest and enjoyment. One of our recommendations is one of our LABS projects: the Elektor mbed interface. This article explores the world of the extended open source library as well as the free online code editor and suite of compilers made available by ARM as a rapid prototyping platform. The project examines the uses and options available when using mbed compatible hardware, and examines what else you can do with them to add to your own design.

There is also another exciting LABS project involving a wireless power converter. This article presents a pair of high efficiency wireless power transfer modules with a capacity of up to 50 watts over distances of up to a few centimeters. This project promotes the current special price we have available for this kit exclusively for members of the Elektor community! We want you to try this promising technology and let us know what you think.

A feature article (Door Spy using Raspberry Pi) also presents software that allows you to communicate with a visitor to your home using your smartphone! It’s great to use an intercom to see who’s at your front door when you’re home, but what if you’re not there? With the project presented here, you can, in principle, see from anywhere in the world who has rang your doorbell, have a conversation with your visitor and even open the door for them – all from your smartphone. Not one to miss.

On top of all this there is the usual range of articles, reviews, projects and of course the famous Retronics pages to stimulate your interest, creativity and imagination. We’ve got all of our updates and news to keep you up to date with the world of Elektor, and we’re sure you’ll enjoy it!


Free download: Elektor Business Magazine, “IoT and Industry 4.0” edition


Elektor Business Magazine (EBM) aims to establish an active two-way link between the electronics industry and research institutes on the one hand and ambitious hardware and software developers in homelabs, startups and spin-outs on the other go. In fact, the magazine is up everywhere solid advice is needed on a high-tech inspired journey. EBM’s September and October edition covers Industry 4.0 in depth, without losing sight of its larger perspective: the Internet of Things.

Elektor business magazine (EBM) aims to establish an active two-way link between the electronics industry and research institutes on the one hand and ambitious hardware and software developers in homelabs, startups and spin-outs on the other. In fact, the magazine is up everywhere solid advice is needed on a high-tech inspired journey.

The September and October 2016 edition of EBM covers Industry 4.0 in depth, without losing sight of its larger perspective: the Internet of Things. First, a general overview is given on security issues, by far the hottest topic when it comes to IoT and Industry 4.0. This is why a second article explores security from an industrial point of view in depth. Provided the security is as robust as possible, Industry 4.0 can go further, from installing specialized MES software to organizing specific but affordable hardware.

Well-established names contribute to your knowledge base in this EBM: DigiCert (a certification authority), Infineon (on hardware-based security for Industry 4.0), Critical manufacturing (on specialized software for Industry 4.0), and CRA Advisory Group (on specific material for Industry 4.0).

Like before Elektor business magazine is available as a free download (see “ATTACHMENT” below). Don’t miss out. Download your copy today!


# BestOfThe90s: JET magazine edition – JetMag.com


The 90s marked the beginning and end of a “golden age” which brought excitement, thoughtfulness and a lot of entertainment to our radio speakers and television screens.

The ’90s were cool, creative, and comedic with a smart edge. With shows ranging from The prince of Bel-Air, where comedy was the glue but the issues of absent fathers, distant mothers and class were also discussed, with four women navigating careers, romance and friendship on Living Single, there was a wide range of content and memorable moments.

On the film side, black people were directing and acting in films that told stories from our experience from a historical perspective to the reality of life in the neighborhood.

And the music ! The era of the New Jack Swing, curated by Teddy Riley, made an impact with sounds that hit the club scene heavily; the sensual Toni Braxton has released hits; Quincy Jones has curated some of the most timeless records and introduced us to Canadian singer Tamia; and Puff Daddy, with his Bad Boy clique, were everywhere.

Ah, the memories. JET made sure to capture the flavor of the ’90s with various covers featuring the stars we loved the most. So we went #archivediggin ‘and pulled out these old 90s but some goodies.

# Bestofthe90s, JET style, starts below!


Carine Roitfeld announces third edition of CR Girls magazine – The Hollywood Reporter


Carine by Roitfeld CR Fashion Book is growing – good news in an industry that, for the most part, is in decline. In February, in addition to the eighth issue of its namesake fashion glossy and the second biannual edition of CR men’s book, she launches a third volume, CR Girls 2016.

Read more Party Rock: Stella McCartney’s Rock ‘n’ Roll playlist for her pre-fall show in Los Angeles

Gigi Hadid, photography through Sebastian Faena for CR Mode Book 8

No, this is not a mini-me magazine Vogue teens. The “girls” in this case are models – by Roitfeld favorites, in fact. The announcement of this new full mag comes with the publisher’s 48-page promise favorites, photographed by Health D’Orazio.

Read more David Beckham and Heidi Klum reveal the best advice they received as children

Instead of editorials with various themes and featuring many creators, the Girls the volume is done a little differently. All the models yet to be announced are dressed – though sometimes barely – in the second collection of Kanye from West Yeezy, associated to Gianvito Rossi shoes. No images have been posted yet, but you can whet your appetite with a preview of Gigi Hadid for the CR 8 on the theme of American girls, shot by Sebastian Faena.

Related stories

Related stories

Related stories

Related stories


EYES IN Magazine Edition 45 shares interviews with innovators from around the world


NEW YORK, July 1, 2015 / PRNewswire / – With videos to magazines, slideshows and more, ad-free, the 45 edition features the world’s innovative creators from multiple industries including tech, healthcare, film and art. EYES IN â„¢ Featured Creators â„¢ Magazine in issue 45 brings you the latest news from Google X Astro teller, the impressive results of natural pharmaceuticals in the treatment of cancer by Dr. Craig dionne and GenSpera, actor of “Love Addict” that of Elliot Haddaway innovative path to a career in film and trans artist Nick cave, known for its SoundSuits.

Photo – http://photos.prnewswire.com/prnh/20150630/226933
Photo – http://photos.prnewswire.com/prnh/20150630/226934

Enjoy excerpts from some interviews:

Tech: “Whatever is a huge problem for mankind we will sign up, if we can find a way to solve it … we want to impact the world and worry about making money on it later.” . “- Astro teller, Google X

Health: “It is particularly important not to damage the immune system at a time when the body needs its defenses the most. – Dr. Craig dionne, GenSpera

Movie: “The funniest part of acting is the phase where I’m in production… the acting. It’s not even when I see the final work, but the acting itself, waking me up every morning. and playing. being.” – Elliot Haddaway

Art: “Break stereotypes, eliminate categories. Let us dream and believe that anything is possible. – Nick cave

Learn more about EYES IN â„¢ Magazine, Corp:

EYESIN.com has a circulation of 30,000 copies, consulted daily in nearly 100 countries on average, and coordinates promotions on social networks with more than 23,000 subscribers on FB with Twitter, Pinterest, Instagram and LinkedIn accumulating 1, 7 million impressions per week.

EYES IN â„¢ magazine is a must read to stay informed about innovative global brands, trends, events and emerging and famous designers. EYES IN â„¢ magazine delivers an interactive, state-of-the-art visual experience in the minds and works of the world’s innovative creators under the artistic direction and insight of the editor, author and artistic director, Vivian Van Dijk. EYES IN â„¢ Magazine publishes monthly digital publications through Magzter (http://www.magzter.com/publishers/EYES-IN-CORP) as well as through the award-winning EYES IN â„¢ Magazine app on the Apple Newsstand iTunes Store, Amazon Kindle, Google Play, and Barnes & Noble NOOK.

Access to the magazine is easier with our Kindle Edition app available for Android, free from Amazon.com – http://amzn.to/10FwejR.

For more information contact Vivian Van Dijk at +1 917 774 0167.

SOURCE EYES IN Magazine


Spanish sports magazine AS launches native digital magazine editing apps: AS Color | Talking about new media


New apps from Apple Newsstand and Google Play are designed in landscape mode, which is increasingly rare these days with print replica editions.

The chances of a publisher investing in a native tablet edition for their magazine today are, I’m afraid to say, less and less likely. But it always happens, and it is hoped that readers find these apps and justify the time and effort required to create them.

The latest launch of this type of native digital magazibe is AS Color and Kiosko y Mas, a Spanish sports magazine that was launched under the developer account Comeresa. This account has only one other app in the App Store, for example Kiosko and more which is a digital newsstand app containing over 400 publications.

Because it comes from a digital newsstand, one would assume that the branded app would simply be a replica of the print edition. But what immediately reveals that this will be a native digital edition is that the magazine’s app icon is in landscape mode. Typically, magazines use portrait icons, as magazines are typically built in portrait mode – and even those that offer landscape reading stick with a portrait icon. The idea is that the landscape icons are only for newspapers.

The exception, of course, are native digital magazines that have chosen to design exclusively in landscape, but few have in fact chosen to stray from the standard look of magaizne icons.

ASColor LibraryApple Newsstand and Google Play apps were created using the Planet tablet platform that is responsible for some interesting native digital magazines, including Revista MASMAG (see here).

There was a discussion among the designers of digital publishing, in 2010 and 2011, as to whether the landscape was the best direction for digital magazines. It seems almost quaint now, as the major publishers really weren’t too keen on native digital publishing and quickly won out, forcing readers to use PDFs. But at the time, there was a good argument to be made for landscape design, one of them being that photography and video work best in landscapes.

Well, it’s up to you. AS Color is free to download and access issues, and since the magazine is in Spanish, designers who are not fluent will not be distracted by the actual articles and can check out the design ideas for themselves. (But if you are interested in the material, there is an English version of the website here.)

To note: when TNM produced the Tablet publishing single number application, back in 2013, Konstantinos Antonopoulos who acted as artistic director successfully convinced me to go with the landscape.

[tribulant_slideshow gallery_id=”61″]


Captured in the center page of Seventeen magazine: Lincoln High in 1995 | Lifestyles


1995 was a very good year for the students of Lincoln High School.

Chinese was offered as a language course option. Rainbow, the school’s diversity club, and POWER (which stands for People Outreaching for Women’s Equality and Rights) were both popular after-school activities. There was a busy daycare for student parents and a parent class on campus.

The school that counts actor Dick Cavett and Oscar-winning actress Sandy Dennis among its graduates followed national trends.

So, it seemed like a natural fit for Seventeen magazine to select the high school of 2,000 students for a photo shoot and report as part of its “School Zone” profiles on high schools across the country.

A three-person team from the magazine spent a few days at the school in January of that year, randomly selecting students from the hallways and ultimately setting up Room 302 as a makeshift fashion photo studio. They photographed around 80 students – knowing that only a handful of them would be part of the six-page series released in April.

In addition to the photos, the magazine asked more than 100 students to fill out questionnaires that would help them create an overall picture of the school. They were asked what songs were on their Walkman, what was in their backpacks (besides books) and some of their favorite things about Lincoln High.


‘Bitter Harvest’ watch: Time Magazine edition


A song on Friday from Alfonso Serrano from “Time Magazine” reads almost like a parody of the “agricultural labor crisis” genre. From the headline to quotes from apple growers on farms in Washington, California and Arizona, to blaming immigration reforms, there are all the clichés – and all of them seem completely counterfactual.

The only thing it doesn’t have: facts supporting the idea that there is a labor shortage on farms in America.

Serrano’s article is titled “Bitter Harvest: US Farmers Blame Billion-Dollar Losses on Immigration Laws”. But the article never confirms this very central claim that losses of a billion dollars exist.

This is probably because there are no billion dollar losses.

As I pointed out earlier, American farmers had their most profitable year in history last year. Profits rose 35.5% to $ 134.7 billion. It is not income and it is not because of rising house prices – it is net cash income, real honest profits to God. (Read more: Shortage of bogus agricultural labor: we need to talk about it)

The year before ? Yes. It was also a new record of profitability.

This year? The US Department of Agriculture expects new profitability records.

So the farmers in Serrano’s article are blaming immigration laws for something that just didn’t happen.

The article begins by talking about apple growers Ralph and Cheryl Broetje, who “rely on approximately 1,000 seasonal workers each year to grow and pack over 6 million boxes of apples on their farm along the Snake River in the ‘east of Washington’.

From time “:

The Broetje, and a growing number of farmers across the country, say a complex web of local and state anti-immigration laws is causing serious labor shortages. With the harvest season in full bloom, strict immigration laws have forced waves of undocumented immigrants to flee some states for more hospitable areas. In their wake, thousands of hectares of crops were left to rot in the fields, as farmers struggled to compensate for labor shortages with domestic help.

“Enforcement of immigration policy has devastated the source of skilled labor on which we have depended for 20 or 30 years,” Ralph Broetje said on a recent teleconference hosted by the National Immigration Forum, adding that last year, Washington farmers, part of an $ 8 billion agriculture industry program – were forced to let 10% of their crops rot on vines and trees. “It gets worse every year,” says Broetje, “and it will eventually put some producers out of business if Congress doesn’t step in and reform immigration. ”

That sounds really bad. Last year, 10 percent of crops rotted on the vines. It must have been a terrible year for Washington farms, right?

Oh. No wait. It has been a good year in Washington. Farm profits rose from $ 1.98 billion to $ 3.14 billion, an increase of 58%. It’s a crazy increase in profitability. Washington farmers would be the envy of American companies if they were publicly traded.

Serrano then turns to Arizona, where he gives the floor to a pecan farmer named Nan Walden, whose “complaints mirror those of the Broetje.”

Walden says Arizona’s immigration laws have created a climate of fear. It may be true. But it certainly did not create a climate of losses for the farmers. Last year, farm profits in Arizona rose 77%, from $ 734 million to $ 1.3 billion.

What comes next is so beyond reality that it’s almost hard to believe it was printed:

“Farms nationwide, from New York to Georgia to California, are suffering from similar labor shortages, despite offering domestic workers competitive packages that include 401 (k) plans. and health insurance, ”writes Serrano.

The first clause is obviously absurd. Farms nationwide are not “shaken” by anything except a massive influx of profits.

We are living through the great American agricultural boom.

But the intermediate clause, the part stuck between the dashes, borders on parody. The two Serrano states, New York and Georgia, also saw their profits increase last year. New York’s farm profits rose from $ 1.5 billion in 2010 to $ 2.2 billion in 2011, a gain of 53%. Georgia’s growth has been a more moderate increase, from $ 2.5 billion to $ 2.6 billion.

It’s almost as if “Time Magazine” is trying to undermine its own history by naming these states. These are certainly good examples of what is happening nationally, but what is happening nationally is an agricultural boom, not a job crisis.

Now let’s look at this last article. Serrano says farms are suffering from a labor shortage “despite offering domestic workers competitive packages that include 401 (k) plans and health insurance.”

The data certainly does not support this. As I reported yesterday, American farms are not facing rising costs for the workers they hire directly. The costs of workers hired directly by farms fell 3.8 percent from 2010 to 2011, from $ 23.5 billion to $ 22.6 billion.

Next year, the Ministry of Agriculture is expected to decline a further 2.1 percent.

The Ministry of Agriculture’s labor cost figures include the benefits. So if Serrano was right about the benefits and health insurance added to allowances, it means wages are dropping even faster than they appear.

Farm labor is getting cheaper, not more expensive.

The article quotes the Farm Bureau Federation, which is a Washington, DC-based farmer trade group, for the proposition that “labor shortages will result in losses of up to $ 9 billion.”

I could not immediately get someone at the Farm Bureau to explain this number. But it is certainly not a “net loss”. Farms will be profitable this year, we know that for sure. So all we’re really talking about, at best, is the profits are lower than they would be.

But in an industry that is already making record profits and seeing breathtaking profitability gains, why should this be a matter of public concern? Also, with labor costs falling every year, isn’t that just a way of saying that if farmers had their elders, labor costs would drop even faster?

Note to Farmers: If you pay less for workers and earn more from farming, you don’t experience labor shortage. You just are not.

Note to editors and reporters: The next time someone tells you a story about a labor shortage, please ask for evidence that labor prices are rising and this is creating a sort of a larger economic problem.

If any other industry in America complained about a labor shortage amid falling labor costs and rising profits, you would make them laugh at the room. Just because someone is wearing overalls doesn’t mean you have to get incredibly gullible.

Sigh. I imagine that “Bitter Harvest Watch” will have to remain a regular feature for a while.

– by CNBC.com editor-in-chief John Carney

_______________________

To follow Jean on Twitter. (Market and financial news, adventures in New York, plus whatever he can think of.) You can email him at [email protected]

We also have two NetNet Twitter feeds. To follow CNBCnetnet for the best posts of the day, including the latest news. To follow NetNetDigest for a feed of each post every day.

You can also be our friend on Facebook. Or subscribe to John’s Facebook page.

We are also on Google Plus! Click on here for John’s Google+ page.

Questions? Comments? Tips? Write to us at[email protected]or send an SMS to: 917-740-8477.

Call us at 201-735-4638.